ComputerOverhauls
New member
Have a macbook air 820-00165 with intermittent power issues. pin 2 of q7010 getting power. tried replacing q7010 and same result. Is there any negative effects of making a solder blob of pin 2 and 4?
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
Can Q7010 be bypassed without any negative effects?
- Thread starter ComputerOverhauls
- Start date
If you bypass Q7010, board will never start with original charger.
Can you post some measurments?
Can you post some measurments?
ComputerOverhauls
New member
Ok. what measurements would you need?
Any voltage you can get around Q7010 and U7100.
ComputerOverhauls
New member
q7010
pin 2 -0.02 mV
pin 4 18.86v
pin 5 19.1v
pin 6 19.1v
U7100
pin 2 0.02mV
pin 2 -0.02 mV
pin 4 18.86v
pin 5 19.1v
pin 6 19.1v
U7100
pin 2 0.02mV
Change D7012, is open circuit...