(347) 552-2258 [email protected]

How it is called or where can I get this connector?

JorgePayar

JorgePayar

Member
The connector is from the mic, the cable and microphone are perfect but the connector is broken.
 

Attachments

  • Captura de pantalla 2016-05-02 a las 15.09.20.png
    Captura de pantalla 2016-05-02 a las 15.09.20.png
    87.6 KB · Views: 0
Crizz

Crizz

Member
I have some of these connectors lying here. You can harvest some of your donor boards.

I set my hot air station as high as it will go and heat the board from the other side. It takes about 40sec for my Aoyue to melt the solder of the other side of the board!
 
JorgePayar

JorgePayar

Member
Crizz said:
I have some of these connectors lying here. You can harvest some of your donor boards.

I set my hot air station as high as it will go and heat the board from the other side. It takes about 40sec for my Aoyue to melt the solder of the other side of the board!
Click to expand...

I mean the male one I have a few microphone cables with that problem.
Thank you Crizz for your prompt reply
 
XooP

XooP

New member
Why don't you just buy a couple of complete microphones on Ebay, they are like 4$.
 
larossmann

larossmann

Administrator
Staff member
This thing is to cheap to do that to, I would just solder it to boards I am selling in refurb machines and call it a day.
 
M

mnaty

New member
Can it be substituted with a customized crimping of dupont connectors in a stack?

It may even just be a form factor of dupont connectors with locking tang.

Just a thought
 
You must log in or register to reply here.
Top