ipetro
Member
The MacBook has stopped turning on. A burnt capacitor (C7701) was found on the logic board, and the inductor (L7700) had exploded; consequently, U7700 also had to be replaced. After reassembling the laptop, it draws 20V but shows 0.00A of current. The Touchpad does not click, and the MacBook is not in DFU mode. Could you please advise on what to check or what I should pay attention to?
20V
0.00A
PPBUS_AON=11V
PP3V8AON=3.8v
PP5V_S2=5v
20V
0.00A
PPBUS_AON=11V
PP3V8AON=3.8v
PP5V_S2=5v
Last edited: