arnonabuurs
New member
I have a 820-00165 with green/orange light no fan. Superclean board looks like new, not 1 corroded probe points at all.
PPBUS_G3H = 8.57
PP3V42_G3H = 3.42
PP5V_S5 = 5v
PP5V_S4RS3 = 0v (no pulse)
PP3v3_S5 = 3.34
PP3v3_S4 = 0.322v @ C4841
but at U1950 pin 1 = 0v, no short on these lines though
PPVRTC_G3H = 3.34
U6100 Pin 8 = 3.34v
What could cause the low voltage at R8000 pin 1/2 from 0.322v? At C8000 I do have 3.4v so the IC gets power. All looks brandnew.
PS checked also all SPI ROM resistors for correct OHM. Looks all clean too.
PPBUS_G3H = 8.57
PP3V42_G3H = 3.42
PP5V_S5 = 5v
PP5V_S4RS3 = 0v (no pulse)
PP3v3_S5 = 3.34
PP3v3_S4 = 0.322v @ C4841
but at U1950 pin 1 = 0v, no short on these lines though
PPVRTC_G3H = 3.34
U6100 Pin 8 = 3.34v
What could cause the low voltage at R8000 pin 1/2 from 0.322v? At C8000 I do have 3.4v so the IC gets power. All looks brandnew.
PS checked also all SPI ROM resistors for correct OHM. Looks all clean too.
Last edited: