Hi Have one of this board after liquid damage. Both ports was totally corroded, replace the port and I get in resold one working port and the other one is not working stuck on 5V 0.00A
PP3V3_G3H not showing up once connected to not working port
replaced port second time/didn't resolve problem
replaced CD3215C00 from good source / didn't resolve problem
Started comparing resistance on port they seams to be all fine compare to working board, no shorts around the CD3215
PP1V8_UPC_XB_LDOA present when charger connected to not working port
PPBUS_G3H 0.11V when connected to not working port
Any ideas ?
Thank you
PP3V3_G3H not showing up once connected to not working port
replaced port second time/didn't resolve problem
replaced CD3215C00 from good source / didn't resolve problem
Started comparing resistance on port they seams to be all fine compare to working board, no shorts around the CD3215
PP1V8_UPC_XB_LDOA present when charger connected to not working port
PPBUS_G3H 0.11V when connected to not working port
Any ideas ?
Thank you
