[SOLVED]MBP retina 2015 13’' 820-4924 won’t sleep

[waseem345]

Got a a1502 2015 model with liquid damage around u3310, replaced a few burned components. The MacBook works perfect, it just won’t sleep when the lid is shut. any ideas what it could be?

 

[gcain]

The magnetic sensor is right next door at J5250.

Have you measured SMC_LID with the lid up and down?

 

[waseem345]

Figured it was J5250, I just accidentally ripped it off just now, taking off all the pads except one. luckily most of them are not connected or ground. I have stuck it down with 2 jumpers on pin 6 and 7 also replaced R5250 and C5250. still no luck

 

[dukefawks]

Hold a magnet over the sensor and see if SMC_LID goes low. Check voltages on the Hall sensor chip.

 

[waseem345]

Fixed the issue. problem was pin 6. although the pad was there the trace was fucked, i put a jumper.