SSD doesn't work anymore (after I tried upgrading it)

feklee

New member
No Title

Photos of the first three times that I opened the machine. Afterwards, I put back in the original SSD, which – as mentioned – doesn’t work anymore as well. In fact, it is not detected after booting via USB.
 

Attachments

  • photo2074.jpg
    photo2074.jpg
    1.6 MB · Views: 0
  • photo2075.jpg
    photo2075.jpg
    1.2 MB · Views: 0
  • photo2076.jpg
    photo2076.jpg
    1.2 MB · Views: 0
  • photo2077.jpg
    photo2077.jpg
    1.2 MB · Views: 0
  • photo2078.jpg
    photo2078.jpg
    1.7 MB · Views: 0
  • photo2079.jpg
    photo2079.jpg
    1.3 MB · Views: 0
  • photo2080.jpg
    photo2080.jpg
    1.7 MB · Views: 0
  • photo2081.jpg
    photo2081.jpg
    1.4 MB · Views: 0
  • photo2082.jpg
    photo2082.jpg
    1.5 MB · Views: 0

2informaticos

Administrator
Staff member
You will need schematic and boardview of 820-3462 MLB.
Then need to measure around J4500 (SATA connector):

Look for power rails first, PP3V3_S0_SSD_FLT and PP5V_S0_HDD_FLT.
 
Top