Latest activity

  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I have 0.8 Ohms between 43 and 44
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    That means you have good contact (o ohm) between pins 43 & 44. You can check directly all voltages and signals on the right side of...
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I get 13V at PPVIN_2V7NAND_LB is that ok?
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I am still unable to understand.Please guide me
  • B
    i jump wire cc830 to nearest pp3v8_aon lt203 and now i get trackpad and keyboard working . thx a lot !
  • 2informaticos
    2informaticos replied to the thread a1502 power issue.
    What about PLT_RESET_L behavior? Test with known good BIOS, just in case.
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    It means to check over the connector, between the same lines. You should get readings close to 0 ohm; if top plate is mounted, of course.
  • H
    henryhickson commented on biangtoto's profile post.
    New profile posts allow users to share updates, thoughts, or questions within a community. People from the areas under FESCO can use...
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    Continuity Left/Right Means Resistance across pins on left and right lines. 45/46. 45/46 is 7.4M Ohms 43/44 is 6M Ohms 1/2 is 400k Ohms...
  • harryjohnson
    harryjohnson updated their status.
    Why the Uber Clone App Model Works for On-Demand Startups The Uber clone app model offers a fast, cost-effective way for startups to...
  • K
    kjchatman1 replied to the thread a1502 power issue.
    you're right. it was the charger. now it powers up and the vcore disasspears after a few seconds then it comes back and stays. but still...
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    J9600 metal plate is in place? Check continuity left/right for all its lines.
  • 2informaticos
    "uc380 1- 0v 3-1,3v 4-0,85v" If you meant UC830, there you have problems. Missing input voltage (3V8_AON) and...
  • B
    uc380 1- 0v 3-1,3v 4-0,85v uc860 all 0v uc840 1,2-1,66v 3-5,18v 5-5,18v 6-5,18v...
  • Instafixx
    PP3v3_g3h was shorted. Injected voltage and remove the cap. Now its flashing the question mark folder. R9350 and adjacent are okay...
Top