Latest activity

  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    Voltages of SSD Side of J9600 PPVIN_2V7NAND_LB is 13V PP5V_S4_P2V7NAND_LB is 0V SSD_BOOT_LB_L is 1.8V SD_PWR_EN_LB_L is 0V...
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    As I said, that line is good. Check the rest of lines.
  • 2informaticos
    Check PMU_ONOFF_L voltage, w/ and w/o keyboard connected. TouchID is embedded into keyboard.
  • K
    kjchatman1 replied to the thread a1502 power issue.
    plt_reset_l is 3.3v except it disappears right with the vcore
  • B
    now the problem is that the power button dont work or its switched on all time because some times it get to chose options or start from...
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I have 0.8 Ohms between 43 and 44
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    That means you have good contact (o ohm) between pins 43 & 44. You can check directly all voltages and signals on the right side of...
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I get 13V at PPVIN_2V7NAND_LB is that ok?
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    I am still unable to understand.Please guide me
  • B
    i jump wire cc830 to nearest pp3v8_aon lt203 and now i get trackpad and keyboard working . thx a lot !
  • 2informaticos
    2informaticos replied to the thread a1502 power issue.
    What about PLT_RESET_L behavior? Test with known good BIOS, just in case.
  • 2informaticos
    2informaticos replied to the thread A1706 SSD Issue.
    It means to check over the connector, between the same lines. You should get readings close to 0 ohm; if top plate is mounted, of course.
  • H
    henryhickson commented on biangtoto's profile post.
    New profile posts allow users to share updates, thoughts, or questions within a community. People from the areas under FESCO can use...
  • Instafixx
    Instafixx replied to the thread A1706 SSD Issue.
    Continuity Left/Right Means Resistance across pins on left and right lines. 45/46. 45/46 is 7.4M Ohms 43/44 is 6M Ohms 1/2 is 400k Ohms...
  • harryjohnson
    harryjohnson updated their status.
    Why the Uber Clone App Model Works for On-Demand Startups The Uber clone app model offers a fast, cost-effective way for startups to...
Top