Bouba148
New member
Hi all
PPBUS_G3H: 8.38V
PP3V42_G3H: 3.400V
PPVRTC_G3H: 3.325V
PP5V_S5:5.122V
PP3V3_S5:3.325V
PP5V_SUS:5.119V
PP3V3_SUS: 3.325V
PP5V_S3: 5.122V
PP3V3_S3: 3.325V
PP5V_S0:5.118V
PP3V3_S0:3.319V
PP1V8_S0: 1.797V
PP1V5_S3: 1.496V
PP1V5_S3RS0:1.320V
PP1V5_S0: 1.506V
PPVTTDDR_S3: 0.747V
PPVCCSA_S0: 0.902V
PP1V05_SUS: 1.045V
PP1V05_S0: 1.052V
PP1V05_S0_PCH_VCCADPLL: 1.058V
ALL_SYS_PWRGD: 3.320V
PPVCORE_S0_CPU:0V
In diode mode red probe to gnd: 0.011V,
Resistance to gnd 14.5 Ohm when not pwered but slowly drops to 1.5 Ohm when the charger is plugged: No short to gnd for me.
In the mean time the fan speeds up to the max speed.
CPU U1000 over heating can't let the finger on it.
PPVIN_S0_CPUIMVP: jumping diretly from 2.5V to 8.40V in loop
Tomorrow I'll pass the board in an UC bath,as I see some test pads corroded around CPU. Maybe crap and corrosion under CPU.
PPBUS_G3H: 8.38V
PP3V42_G3H: 3.400V
PPVRTC_G3H: 3.325V
PP5V_S5:5.122V
PP3V3_S5:3.325V
PP5V_SUS:5.119V
PP3V3_SUS: 3.325V
PP5V_S3: 5.122V
PP3V3_S3: 3.325V
PP5V_S0:5.118V
PP3V3_S0:3.319V
PP1V8_S0: 1.797V
PP1V5_S3: 1.496V
PP1V5_S3RS0:1.320V
PP1V5_S0: 1.506V
PPVTTDDR_S3: 0.747V
PPVCCSA_S0: 0.902V
PP1V05_SUS: 1.045V
PP1V05_S0: 1.052V
PP1V05_S0_PCH_VCCADPLL: 1.058V
ALL_SYS_PWRGD: 3.320V
PPVCORE_S0_CPU:0V
In diode mode red probe to gnd: 0.011V,
Resistance to gnd 14.5 Ohm when not pwered but slowly drops to 1.5 Ohm when the charger is plugged: No short to gnd for me.
In the mean time the fan speeds up to the max speed.
CPU U1000 over heating can't let the finger on it.
PPVIN_S0_CPUIMVP: jumping diretly from 2.5V to 8.40V in loop
Tomorrow I'll pass the board in an UC bath,as I see some test pads corroded around CPU. Maybe crap and corrosion under CPU.