punkieftw
New member
Hi, i have a Macbook Pro Retina Touchbar 15" , No water damage, No corrosion visible, board looks pretty well, but not turning on.
On the USB-C measure tool, gets 5v - 0.0 amps for a second, them try to get some more power and up to 0.03 and the USB-C PowerMeter get off and on again on a infinite loop.
I measure this:
PPBUS_G3H - 0.0017v
PP3V3_G3H - 3.34v (For a 3-4 secs and them gets down for a sec or less and gets again up)
PPDCIN_G3H_CHGR 5.21v (For a 5-6 Secs and them gets down around 1.2v for a sec or less and gets again 5.21v)
I really don't know where looks first, so many rails and signals are new in this boards and i don't know who must be present first.
Any help?
Thanks in advance.
On the USB-C measure tool, gets 5v - 0.0 amps for a second, them try to get some more power and up to 0.03 and the USB-C PowerMeter get off and on again on a infinite loop.
I measure this:
PPBUS_G3H - 0.0017v
PP3V3_G3H - 3.34v (For a 3-4 secs and them gets down for a sec or less and gets again up)
PPDCIN_G3H_CHGR 5.21v (For a 5-6 Secs and them gets down around 1.2v for a sec or less and gets again 5.21v)
I really don't know where looks first, so many rails and signals are new in this boards and i don't know who must be present first.
Any help?
Thanks in advance.