iganas
New member
Hi, new here!
Got a A1706 board that had minor liquid spill by the display connector on the screen side, as well as around BIOS chip.
After a new display cable and touch-up of suspicious components, the symptoms are as follows:
- No internal display with known good screen, external display works
- Draws 20v 350-600mA
- Takes nearly two minutes to boot up the screen and then another minute to display folder icon
- PP3V3_2V7_NAND = 0v
- PICCOLO_IUVD = 0v
- PP3V3_2V7_NAND_VCC = 0v
- PP1V2_SSD_HOT = 0v
- No obvious corrosion left on the motherboard nor probe points
- Nothing flaring up on thermal camera
Do these symptoms sound familiar and what would be the next logical area to test?
Thanks for your assistance
Got a A1706 board that had minor liquid spill by the display connector on the screen side, as well as around BIOS chip.
After a new display cable and touch-up of suspicious components, the symptoms are as follows:
- No internal display with known good screen, external display works
- Draws 20v 350-600mA
- Takes nearly two minutes to boot up the screen and then another minute to display folder icon
- PP3V3_2V7_NAND = 0v
- PICCOLO_IUVD = 0v
- PP3V3_2V7_NAND_VCC = 0v
- PP1V2_SSD_HOT = 0v
- No obvious corrosion left on the motherboard nor probe points
- Nothing flaring up on thermal camera
Do these symptoms sound familiar and what would be the next logical area to test?
Thanks for your assistance