For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Hi ive got an 820-01700 that had a short on U9580 with 0 volts when plugged in , i removed U9580 and short went away , now ive replaced U9580 and board powers to 19.6V then cycles off when it reaches 1.6a , under the thermal cam it shows U9580 and U9400 getting very hot so im guessing i have a...
Hi , ive got an 820-01958 not booting into operating system, it boots to the apple logo but no loading bar, it draws 0.62 at startup then drops down to 0.25 and wont go any further , also if i try to go into recovery mode apple logo pops up then goes blank screen, dosnt run from battery either ...
Hi ive got a 820-00165 board thats missing PM_SLP_S4_L but im struggling to see what creates that rail as far as i can tell im left with cpu or smc , so ive changed the smc and still the same , Diode mode reading is 495 so im sure its not a short , does this mean dead cpu or am i looking in the...
Hi ive got an 820-00875 stuck at 19.3v no boot. ppbus_g3h is 12.93v pp5v_s5 is missing , diode reading is 450 on pp5v so guessing no short , i see it comes from pp5v_s5_ldo but cant find where that comes from, under the thermal cam the smc is getting hot . I did see the smc has pp5v_ldo but not...
Hi ive got an A820-00244 no voltage or amp draw from charger i have tried different charging ports with no change . Diode reading on both sides of F3050 is 590 so i dont think theres a short , i thought i should at least get 5v there ? , im a bit lost where to start with this one
little update , i did reflow all the components and flux the cpu and put it through the ultra sonic again which made no difference however ive just realised the board turns on everytime if i leave it disconnected until it goes stone cold