For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
I use this charger, I didn't know about the alignment, thanks. You are right about the Ohms sorry I edited already.
Ok I will work on it. Thanks again Duke.
PS: I didn't see the no stuff on the diagram, I will check twice next time sorry
No Title
OK, now the board is trolling me. Now I have a dim green light on charger and no fan spinning. Im learning so I know for Louis videos that first thing to measure is ppbus_g3h but there was no time for that, I plugged it in and the r6905 blew away...there is a short there, my index...
I´d like to know if you had any experience about that or the worse experience that a customer gave you in any single way and how you solve the situation.
Thanks Duke for the advice, but now Im learning so I would like to follow the rabbit hole to hell probably :)
Did you fix any bad ram memory, did any reball, changing it or something like that in the past? Any temperature advise for changing memory slots?
Hi, I have a Macbook air that had the usual problem, it needs to replace the graphic chip.
I did the oven thing a couple times, long time ago, and it was working well, but now...has green light, fan spinning but doesn't chime and has no backlight.
I´ve measured u7100 pin 16 and I have 0.0V, I...
I had the same problem in a 820 3115b till yesterday, then I checked and it was because a resistor, over that area that Duke and Louis said. Now it is working perfect!!
No Title
It shows this one.
About the short, I was confused when I removed u9000 + c9009 there was no short, but I saw bubbles when I put alcohol in it and I thought the short was still there, my mistake sorry.
But now Im confused because of this error about the ethernet, it seems to be...
No Title
Ok, I feel a little bit ignored here...anyway, now the short is gone it was u9000 and c9009, I changed them and now it is working BUT...
I ran ASD and it shows me this:
Can anybody help me solve this problem?
I mean the area is still hot.
If I put IPA like you show in one of your videosto know where is the short, there are bubbles in c9009 and u9000 too, and gets hot too.
When I make the measurement, in pin 1 c9009 for example it gives me 3.32v I thin is this rail pp3v3_s5_lcd
Hi, Im newbie and starting to learn, what is wrong with this MB. Sorry if I say stupid things or I make stupids questions.
The first problem that I have is when I close the lid, the macbook switch off.
So I started to watch carefully for symptoms and around u9000 is shorted it gets too hot, I...