(347) 552-2258 [email protected]

Search results

  1. C

    Ultrasonic breaking boards?

    Ultrasonic @ 65C with Branson ES, 6 minutes a side. Alcohol bath for a few minutes. Blown dry with air compressor on regulator, and sit on my iPad heat pad @ 65C for 20 minutes with a towel or rag over it. Always dry as a bone.
  2. C

    820-2936-B One USB port not working

    Where is a source for the parts ? Donor board, or can they be obtained ?
  3. C

    820-2936-B One USB port not working

    Ok, working with connector J4610 (USB that has power but no data) J4610 Grounds on pins 4,5,6,7,8 are good. Pin 1 @ 5V Pin 2 is connected to L4610 Pin 3 & Pins 5 & 2 on D4610 Pin 3 is connected to Pins 3-4 on D4610 & Pin 2 of L4610 L4615 @ 0.2 Ohms L4610 Pins 1 & 2 OPEN L4610 Pins 3 & 4 @...
  4. C

    820-2936-B One USB port not working

    820-2936-B One USB port not working , was two but after a ultrasonic cleaning one has been regained. No signs of liquid damage, but had some crusty spots on the board, Both USB had 5V at the connection however would not read data. After it's bath, one USB (Closest to the user) started...
  5. C

    820-00165-A Liquid Damage Wont run off Battery or Charge.

    I'll be dammed.. Must have shorted the battery when all the fun happen. Battery for the win ! All is well. Thanks !
  6. C

    820-00165-A Liquid Damage Wont run off Battery or Charge.

    Sounds like a plan. I'll give it a go and report back. Thanks for your time !
  7. C

    820-00165-A Liquid Damage Wont run off Battery or Charge.

    I have a MacBook Air "13, Early 2015 A1466 820-00165-A Came in still wet, opened it right up and unplugged the battery. Gave it an ultrasonic bath right away followed up with an alcohol bath, heat pad and left overnight. Reassembled it the next day. Boots up on charger only, however it does...
View older results
Top