Search results

  1. M

    [SOLVED]820-2936 Green light, no fan.

    Fixed! Was a short on PP5V_3S rail. Measured a short on pin 2 of L7260. Injected 5v on pin 2 and C6213 started to heat up. Replaced C6213 and everything is working like a charm again. Easy peazy lemon squeezy. Thanks for your help!
  2. M

    820-3787 short to ground on PP3v3_s5

    So it's been a while, but we have finally received a 'new' pch from china. I slapped it on the board, and the short to ground is gone. The machine seems to respond to smc reset, but i am still not getting PP5VS4_EN, or any of the higher power rails.. does this have to do with the clean ME region...
  3. M

    820-3476 No light on magsafe, no fan, no response to smc reset

    Hi there, 1. R7020 is getting very hot. 2. L7095 short on pin 2. 3. Replaced u7090 because pin 2 was burned 4. Trackpad connector pins 15 and 16 also look slightly fried. Please advice how to proceed. Thanks!
  4. M

    [SOLVED]820-2936 Green light, no fan.

    Hello there fellow repair technicians, I am seeking an advice on how to proceed with this board. PPBUS_G3HOT -12.5V PP3V3 on L7260 - fluctuating low voltage 0.1-0.3V PP5V_S3 on L7220 Fluctuating 0.7-3V 5V3V3_reg_EN - fluctuating 0.5V-3V U7200 looks nice and clean. No water damage on the...
  5. M

    820-3787 short to ground on PP3v3_s5

    We have practiced on easier boards, and have done multiple succesful gpu replacements, that's why it was a bit surprising. I'll let it bake a bit longer before trying to remove.
  6. M

    Imac 820-3302 0.4 ohms short to ground on PP12V_s5

    We have given up on this one. Replaced the motherboard, and everything is ok again.
  7. M

    820-3787 short to ground on PP3v3_s5

    I'm having trouble removing this chip from the motherboard with the bga machine, does anybody know the temperature needed to remove the PCH from the newer models?
  8. M

    820-3023 macbook air no backlight

    Well neither do i, since i replaced the capacitor with a good one, measure the path, everything seems ok, but after trying it the resistor is no longer conducting. I know this is unlikely, but it does seem to be what is happening. I've seen the sticky about these backlight circuits, and i will...
  9. M

    820-3023 macbook air no backlight

    It's taken a while for me to get back to this one, there's a lot of weird stuff happening with this machine. PPBUS_S0_LCDBKLT measures a steady 8.05 V without a screen, but as soon as i connect a screen it drops to about 4.8 V i checked for presence of BLK_EN, it seems that the signal is coming...
  10. M

    [SOLVED]820-4924 short to ground on SMBUS_BATT_SCL

    I am returning to this one for a less clear issue. After re-assembling the machine and final testing it turns out the machine is running throttled. Self-diagnostics of the machine give error PPF004, issues with the fan. turning it to maximum using macs fan control shows that it is only running...
  11. M

    Late 2013 macbook pro screen issues

    we replaced the whole assembly. If it does come back i'll continue testing. But your suggestion does seem like a contender.
  12. M

    Late 2013 macbook pro screen issues

    Just a quick question to see if anybody recognises this. We replaced the screen on this machine because there were intermittent stripes appearing. the new screen was not giving image untill we connected it to an external monitor, and then the laptop screen started working again as well. The...
  13. M

    [SOLVED]820-4924 short to ground on SMBUS_BATT_SCL

    Well, sometimes lucky rubber ducky, the machine recognises the battery again after replacing the ISL.
  14. M

    Macbook pro 15-inch 2016 touch-my-tralala-bar keyboard replacement

    Hi there, Has anyone tried separate keyboard replacement on 2016 macbook pros already? Is it doable or you need a whole palmrest? Thanks.
  15. M

    [SOLVED]820-4924 short to ground on SMBUS_BATT_SCL

    The board has waterdamage in the battery connector area. It still boots to OS, but it's not detecting the battery. SMBUS_BATT_SCL measures 0.4 ohms to ground. R5381 measures 2000 Ohms from the PP3v42 side. I already replaced D7050, but the short is still there. the only other termination points...
  16. M

    820-3023 macbook air no backlight

    After cleaning this board no backlight, after some digging around decided to replace the U9701 backlight driver. On plugging in the charger i get 50V on the backlight driver, but this drops down to ~20V after a split second. Without a screen plugged in i get 0 volts on the drive line. I've tried...
  17. M

    820-3787 short to ground on PP3v3_s5

    I have a 3662 with the pch still on it, from a customer who did not want to continue the repair, i'll try that first.
  18. M

    Forum subscription error

    Thank you guys. Everything is super duper now.
  19. M

    820-3787 short to ground on PP3v3_s5

    oh and also, do i need this specific board, or are there multiple options for the donor?
  20. M

    820-3787 short to ground on PP3v3_s5

    Hey Duke, one more question for customer expectation management, from what i understand i will need a donorboard for the U1100, reballing etc. and after that what will still need to happen to the bios?
Top