Search results

Hi, I have a 3024 board wich was LD, it starts but the battery is not recognized. I think is the SMC but don't have a donor board or new smc for this (have in stock only MBP 2936 SMC's) there are other smc which are compatible with this board. I've hoped this would not be a SMC problem so I've...

Hi, I have a 820 3332 board on which the customer fried the magsafe and the tried to replace it. The F6905 was blown up, after replacing the fuse the charger has flashing green light every 3 sec When measuring PPBUS_G3H and PP3V42 they fluctuate, when charger is green they have the usual...

Hi, I have 3787 board that had a coffee spill on the IO board, no signs of oxidation It turns on but blocks at half boot and has blue vertical lines on the screen like you see in the pictures. Still waiting for the Crest CP 500 so not ultrasound yet Any suggestions where to start ? Thanks

Hi, I have a 820 2936 mb that charges very slowly. Already changed Q7055 with a known good one but no change, same thing with U 7000. U7000 area look good no water damage. Any idea where to look next? Battery at 95 % and the estimated time of full charge is 35minutes. Thanks

I have a doubt over a 820 00165 Macbook air. Does this machine turn on without battery or not when having the charger connected. Is the first time I work on a 2015 Macbook air and never thinked to connect the battery while troubleshooting after 4 hours of misery :( and replacing the corroded...

Hi, I have a 820 3209 that wont turn on, have green light for 3 sec and then orange without battery connected PPBUS_G3H - 8.39V PPDCIN_G3H - 19.88 but fluctuating to 19.99 v PP3V42_G3H - 3.4V and rapidly changing to 3.6 or 3.9 when I removed R7252 PP3V42_G3H stayed on 3.9v And also the fan...

Hi, I have a 820 3115 mlb which does not turn On and has no green light. Ppbus_g3h - 4.115V At first I had 1.1 V on ppbus_g3h the I replaced Q7035 and got 4.115V on ppbus, still no green light and no power. PP3V42_G3h is not present. Any sugestions? I've also checked the curent sensing...

Hi, I have a 820 2936 mb came in with none of the 2 usb working. On the usb port A found the C4695 shorted to ground and now the port works, port B on the other hand has PP5V_S3 on pin 1 but no sign of life when plugging in the stick (no light, no detection) No liquid damage or other signs of...

Hi, I have a 820 2530 that goes to sleep right after it shows the desktop, the board came in for a keyboard connector replacement. I've changed the connector and when i start the machine all goes fine until I see the desktop, after that the mac puts himself to sleep, removed the motherboard to...