Search results

  1. J

    820-02098,A2442, CD3217 chip Problem

    Hello, This is CD3217(Left UG400) Problem. I have no A2442 doner board. So I wolud like use other A2338, A2337, A2485 boards. As I know it should be same board and same location? or Can I use other CD3217 A2337,A2338,A2485 etc.. And one more question. When I testing hot spot. CD3217 and also...
  2. J

    820-02098 (A2442) Power Rebooting

    Hello, this is the 820-02098 (A2442). There was no water damage. 20V boots normally, but it keeps turning off and on. There seems to be no short value when testing diode mode. - PPBUS_AON 11.98V (when turned off) 12.27V (when turned off) - PPVIN_P3V8AON 11.98V - PP0V9_ATCRTMR2_SVR 0V -...
  3. J

    A2141(820-01700) stuck at 5V, PMU(U7800)

    Hello I got A2141(820-01700) stuck at 5V, There is a fever in the PMU. PP3V3_G3H circuit is short. If I replace the PMU on the other donor board, will the PMU work normally?
  4. J

    820-02098 A2442 Backlight issue after water damage

    Hello This macbook does not work display backlight after water damage. There was water damage on UP800 PP5V_S2_MAIN was short. When I tested power supply, UP800 had a fever and I replaced UP800,CP818,CP817. PP5V_S2_MAIN has no more shorts. Everything seems normal, but the backlight still...
  5. J

    820-02100 Power off after water damage

    Hello, this board has water damage. It goes up to 20V, then turns off and on again. I keep repeating. It boots normally when turned on with the battery but won't charge. There was water damage in the UG400 (CD3217), and I replaced the UG400 and peripheral capacitors. The symptoms are still the...
  6. J

    Diode mode, conduction mode

    Hello, this is a basic question. When checking the capacitor in diode mode and conduction mode with multimeter. Diode mode measurements come in V and DC, Is that means voltage value? Is the measurement in conduction mode a resistance value?
  7. J

    How to get a boardview with a voltage written on it?

    In the case of the board view on a black background, the C7713 (0.163) voltage is marked, but the board view I purchased on a white background does not have a voltage. Also, how can I get the voltage from the circuit diagram? Sorry for the basic questions.
  8. J

    I just started studying board repair

    Hello I just started studying logic board repair. I have all the equipment and logic boards. I've been running a MacBook repair shop for 10 years, so I'm aware of MacBook hardware. I saw Rossmann Repair Training Guide and REWA MacBook Motherboard Repair Course ($299). But I still don't solve...
Top