Search results

Sure enough, it failed for IPBR and ID0R on this go around, and the other error disappeared.

Okay, just ran a 2nd time, and now its telling me temp sensor Th2H left fin stackprox is failing

Those errors popped up because some of the cables were not connected. I put the entire machine back together, ran it again and everything passed. I also tried with a working OEM battery, still not charging.

[No message]

I thought after after early 2013 they switched to ASD 2 which runs through the Apple servers? Do you know where I can get a copys for later machines?

2info, system report does list, capacity, cycle count, ect. Q7155 Pin 1 12.6v Pin 2 12.61v Pin 3 12.6v Pin 4 jumps back and forth from 11.91-12.59v Pin 5 power cycles between 11.58-5.6v U7100 Pin 9 .412v Pin 15 .058v Pin 26 .022v The ASD pack I have only goes up to early 2013 Pro, this is a...

New Chinese copy, but 3 different ones were tied, and behavior is exactly like the OEM that was pulled for this issue. System report battery info all seems to be present. Is there something specific you would like to know from there?

17/18 3.5ohm 27/28 21.1ohm

820 3787 not charging battery, OSX recognizes the battery and charger. OEM 85w Apple charger, green/orange light on magsafe. 12.6 on PPBUS with board only, 12.9 with batt connected. 3.42 is present. Wrench symbol on battery icon, system says not charging. Battery has been replaced, no change.

Tried SMC Bypass, and batt/charger, no change. Unfortunately I do not have a scope or a frequency meter.

Im positive this is a 100% working OEM Apple charger, I bought it straight from the Apple store. I replaced the SMC, no change.

SMC_BATLOW_L is 0v

SYSCLK CLK32K RTC .383v RTC RESET L 3.31v PHC SRTCRST L 3.31v PCH INTRUDER L 3.03v PCH INTVRMEN L 3.21v

Sorry 2info, I did not notice that, when I searched S5 PWRGD on boardveiwer it highlighted that line as well. So I have 3.45v on S5_PWRGD.

I definitely have 0v 9n pin 2 @ R2584

Pin 1 3.47v Pin 2 3.47v Pin 3 3.45v Pin 4 0v Pin 5 0v Pin 6 3.32v Pin 7 0v Pin 8 3.45v

No real history machine just stopped powering on as far as I know. The board looks like its in good shap, no LD. S5_PWRGD 0v PM_DSW_PWRGD 3.470v PCH_DSWVRMEN 3.201v

Yes, 0v PM BATLOW L measurement taken from pin 2 @ Q5040. I am using an OEM Apple 85w Magsafe 1

SMC_ADAPTER_EN 3.45v PM_BATLOW_L 0v 3V3_S5 3.32v 3v3 SUS 0v No pulse on PM_SLP_S4_L, at least none that my multi meter could pick up. Toggled SMC ON/OFF, no change.

PPBUS G3 12.59v PP3V42 3.47v PP5V S5 5.02v PP5V S3 0v PP3V3 S3 0v PM SLP S4 L 0v