(347) 552-2258 [email protected]

Search results

  1. I

    820-4924 - No green light Help

    d7005 pin 1 20.37 pin 2 12.26 pin 3 20.18v PP18V5_DCIN 20.43 SMC_RESET_L 3.38 oem charger 85w 820-4924 this is macbook pro :/
  2. I

    820-4924 - No green light Help

    this unit came in no note, no liquid damage at all please help :( all the lines below checked continuity to ground and none found ]ppbus_g3h 12.26 pp3v42_g3h 3.413v d7005 pin 1 20.37 pin 2 12.26 pin 3 20.18v PPVIN _S5_HS_COMPUTING_ISN 12.26 PP18V5_DCIN 12.36 PP3V42_G3H 3.42 PP5V_S5 0v...
  3. I

    a1707 - 820-00281 - stuck on batter logo with lighting,

    i did and no difference at all,
  4. I

    a1707 - 820-00281 - stuck on batter logo with lighting,

    , got this macbook it is tuck on battery logo with lighting under, draws 1.04 when battery logo comes up, then goes back to 0, and 20V any ideas. maybe knows issue someone has already fixed,
  5. I

    820-00923 - not coming - no liquid damage

    i need a stencil, where would i be able to get it for reball
  6. I

    820-00923 - not coming - no liquid damage

    would getting it from 820-00928 be ok?
  7. I

    820-00923 - not coming - no liquid damage

    820-00923 - not coming on digitar USB C Reader reads 20.0V, 0.02A no damage at all, clean board Thank you guys in advance, FOUND THE ISSUE - UB000 Where can i get a replacement, searched online and cant find it HELP PLEASE. thank you
  8. I

    820-3662 - REPLACED BATTERY WORKED, 1 WEEK LATER DEAD

    i was able to heat up the PCH and i am getting 3.3V on PCH_INTVRMEN_L diode mode on F7140 without f7140/41 pin 1 0.472 pin 2 going up and up, i am guessing short NOT on system side?
  9. I

    820-3476 - no Wi-Fi

    ive tried it all and no luck, can it still be the SMC?
  10. I

    820-3662 - REPLACED BATTERY WORKED, 1 WEEK LATER DEAD

    sorry for not being as knowledgeable. how do I force the signal with 1K, instead of 330K.
  11. I

    820-3476 - no Wi-Fi

    AP_RESET_L is 3.25V
  12. I

    820-3662 - REPLACED BATTERY WORKED, 1 WEEK LATER DEAD

    820-3662 - Replaced battery and customer took it all worked perfectly fine, and about 1-2 weeks later came back no light or life at all, please help, thank you will reply fast as this customer is a bit mad and trying to see what i should do, Thank you guys in advance, D7005 PIN 1- 16.57V...
  13. I

    820-3476 - no Wi-Fi

    run a wire from AP_CLKREQ_L to ground and see if it starts? i did soldered J9510 Pin22 (AP_CLKREQ_L) to Pin20 (GROUND) and wifi still did not work
  14. I

    820-3476 - no Wi-Fi

    AP_CLKREQ_L -3.27v AP_RESET_L - 3.26v
  15. I

    820-3476 - no Wi-Fi

    tested with other RIO flex? J9510 clean will test these signals
  16. I

    820-3476 - no Wi-Fi

    this computer was liquid spilled, and there is no wifi, i have tested a working computer and placed the board in there and still no wifi do these usually have a Bad SMC if no wifi and tested with a known working wifi card and side board?
  17. I

    820-00239 - Voltage 20V, Amp 0.001

    minor liquid damage on U7000, on pin 5 (PPVIN_G3H_P3V3G3H) D6902 PIN 1 13V PIN 2 20V PIN 3 19V Replaced U7000, and also U6903 Any ideas where to start,
  18. I

    820-00850 - 1.2UH-20%-0.12A-1.17OHM (what can i use instead)

    c7607 was shroted, i already fixed it tested and it comes on, while tracing it i took out L5100 and need to place one in there
  19. I

    820-00850 - 1.2UH-20%-0.12A-1.17OHM (what can i use instead)

    have this board and have found the short, L5100 - 1.2UH-20%-0.12A-1.17OHM i need the above described usually i input it into a different model schematic, but unable to find this one, can you guys tell me which one if any i could use, sorry for my ignorance
  20. I

    820-4924 - no green light wont power on

    issue was the DC Jack, i had total of 3 bad ones, such a waste of time, sorry Thank you guys, solved!
Top