Search results

yes USB-C meter is stuck at 5V

not starting at all

Hello i have a macbook 12” early 2015 that is not charging at all, I've tried a new charging port and also a charging port Flex with a new battery and it is still pulling 0 amps. Board 820-00045-10 any recommendations on where to start

PPBUS_G3H .489 3V42_G3H 3.405

board number 820-00163

I'm so sorry for such an amateur question but how do I locate the main logic board number? Not just on this MacBook but on any MacBook, im having a very hard time finding information on how to find it.

is it possible to get the schematics from you

i have a macbook pro that is only pulling .08 amps and with a new battery it is pulling the same. i have ordered a new magsafe connector is there anything eles i check on board? thanks

I do have usb activity and external video, im repeating the question how much amps should a healthy board be taking and how do I find the board code.

also forgot to add the battery count is at 350

I got in a macbook pro that supposedly was not charging or powering on. When i received it, i plugged it in and the devices powered on but is only pulling between .50 to .80 amps and the wattage is moving between 40.5 to 48 w. What is the normal amps reading for this device and where could i...

WheN I plug in the MagSafe I get a solid green light immediately followed by a flashing amber light.. and the device recognizes the New battery with percentage shown

this device just stopped taking a charge(no water damage), i have tried different cables including apple new ones i have replaced the battery and the device works fine when connect to the fully charged new battery but just cant take a charge, and i have also replaced the mag safe charging port...

i had a gereral question to ask that might be off topic..im having issues accessing a SSD that has bitlocker(i have removed it out my water damaged laptop and installed it in a chaise that is connected via usb3 to my current laptop), do you have any recommended software for bypassing this so i...

Sorry I am not too familiar with the audio codec...

we just Replaced the audio board and also the cable and there seems to be no corrosion on J6799

We have swapped out the audio board with a known working board and we have the same issue going on. Do you have any suggestions on anything we should check

Hello I have a MacBook Pro a1989 with touch bar that only turns on when it is plugged into the charger. when plugged in it does charge battery but the battery does not go over 1%, The moment I disconnect the battery from the machine it turns off when it is plugged into the charger it is pulling...

We don't know too much about where it spilled. I have an audio board for this device on the way so got our fingers crossed. I also had one question if you wanted to find schematics for this board where would you be able to find them

thank you for the reply We have very little history on the device, all we know is that a little bit of wine was spilled on the device at one point. Currently no audio is working even if I plug in headphones unfortunately we do not have another audio board to test on, there is nothing I can...