Search results

48.8 ohms on L7430 ... and PPBUS_G3H_SPKRL also a lot of caps touching the ground :D Also when plugged in on U3100 on F3000 i have 30V and on U3200 6.8v

On L7670 12.3kohm

On F3000 i get 20v and on F3010 i only have 5v... Also C6424 and C6404 are shorted on PPBUS_G3H_SPKRL...

Hi guys. I have this board which has 2 type c ports of which only one the second port works ad charges normal. This happened after using a dongle and i noticed some sticky thing on the board which i cleaning as much as possible. Any advice? Thanks

3v42 is present around SMC. There was some liquid damage in the area i renewed everything last time but maybe something under the SMC

Hi :) PPBUS_G3H 8.2v SMC_RESET_L 3.3v SMC_PM_G2_EN no voltage

Hey Guys. A previous repair liquid damage was working for some time and randomly would power on or not... 820-00165 A1466 no green light no power... PP3V42_G3H - 3.4 PPDCIN_G3H - 15v PP3V3_S5 - 0.29v

HI. The board had some liquid damage all taken care of also replaced LSDV and now at this state. U8300, U8330 and U8400 no damage on them. Any advice please? Thanks :cool:

i Was about ti but this morning found it dead not powering on :eek: going through the power rails again now :D Edit: PPBUS_G3H Shorted ... Q7130 was the issue hopefully now it's gonna be good :cool: All good Charging with the replacement of the Q7130 that was the issues all along :p Thanks...

pin 1 0v pin 2 16.3v pin 3 3.9v pin 12 3.4v pin 14 3.4 pin 19 & 20 5.5v pin 24 16.4v

i tried but still the same. In the meantime U7100 burned so it stopped powering on, After replacing it with another one it power on but it's overheating U7100 cannot touch it.

Powering on not charging. The board was liquid damaged even on the battery itself. After some time working on it i managed to power it on and i ordered a new battery. When plugged in working normal all good once i plug in the battery it changes to battery and not charging and the green light not...

Thanks 2Informaticos, still waiting from the client to approve the repair and in the meantime i ordered type C controllers just in case i need them just couldn't find a stencil. Will update asap... :D

Hi Guys. i have a board 820-923-05 not powering on took some measurements shorted on C3200 and PPDCIN_G3H is only 5v. Any suggestions please? Thanks :cool:

The board was powering on and now All magically started working trackpad and keyboard... testing now but all seems good :D Thanks 2informaticos

Will do :) Thanks 2informaticos

Yes i did it :D at some point powered on but it shut down and didn't power on again

no Still not powering on

hmmm... Nothing on PM_SLP_S4_L

Diode mode 3V3_S4_FET 0.104 It's strange now i get IN and OUT voltage on U8000. all measured just board plugged in