Multiple liquid damage points. Near R8711 ssd 1v8 power was especially bad. Replaced and tested nearly everything in that section.
Also found damage on cc805 and cc804 pins 1 pads were missing completely. Replaced and reattached with magnet wire. Nervous about that since it's CPU power related. I'm new to these boards so apologies if I missed important values.
PPDCIN_G3H: 19.95
PPBUS_G3H: 12.63
PP3V3_G3H: 3.38
PP3V3_S5: 3.34
PP3V3_S4: 3.36
PP5V_S5_LDO: 5.14
PP5V_G3S: 5.14
PP1V8_G3S: 1.8
PP1V8_S3: 1.8
PP1V2_S3: 1.2
PP1V_S3: 1.04
PPVCCIO_S0_CPU: 0.95
PP2V7_NAND_SSD0: 2.52
PP3V0_MESA: 3.3
forgot to add this: PPVCC_S0_CPU : 0.899
Enables:
PM_SLP_SUS_L: 3.31
PM_SLP_S5_L: 3.30
PLT_RST_L: 1.79
ALL_SYS_PWRGD: 1.80
CPU_VCCST_PWRGD: 1.04
PM_SYSRST_L: 3.32
SMC_RSMRST_L: 1.79 (reboots on measurement)
PM_RSMRST_L: 3.3
PCH_PWRBTN_L: 3.33
PM_BATLOW_L: 3.21
PMU_CLK32K_PCH_R: present @ 32k
PCH_INTRUDER: 2.70
PCH_SRTCRST_L: 2.99
SOC_COLD_RESET_L: 1.7
Also found damage on cc805 and cc804 pins 1 pads were missing completely. Replaced and reattached with magnet wire. Nervous about that since it's CPU power related. I'm new to these boards so apologies if I missed important values.
PPDCIN_G3H: 19.95
PPBUS_G3H: 12.63
PP3V3_G3H: 3.38
PP3V3_S5: 3.34
PP3V3_S4: 3.36
PP5V_S5_LDO: 5.14
PP5V_G3S: 5.14
PP1V8_G3S: 1.8
PP1V8_S3: 1.8
PP1V2_S3: 1.2
PP1V_S3: 1.04
PPVCCIO_S0_CPU: 0.95
PP2V7_NAND_SSD0: 2.52
PP3V0_MESA: 3.3
forgot to add this: PPVCC_S0_CPU : 0.899
Enables:
PM_SLP_SUS_L: 3.31
PM_SLP_S5_L: 3.30
PLT_RST_L: 1.79
ALL_SYS_PWRGD: 1.80
CPU_VCCST_PWRGD: 1.04
PM_SYSRST_L: 3.32
SMC_RSMRST_L: 1.79 (reboots on measurement)
PM_RSMRST_L: 3.3
PCH_PWRBTN_L: 3.33
PM_BATLOW_L: 3.21
PMU_CLK32K_PCH_R: present @ 32k
PCH_INTRUDER: 2.70
PCH_SRTCRST_L: 2.99
SOC_COLD_RESET_L: 1.7
Last edited:
