Hi,
this board is clean no liquid spill, the customer say, the mac make beep memory after an install system.
Now I have just fan spin, no chime and no display. i make this measure:
PPBUS_G3H 12.8v
SMC_ADAPTER_EN 3.38v
PM_BATLOW_L 3.3v
ALL_SYS_PWRGD 3.38v
PM_DSW_PWRGD 3,4v
PM_MEM_PWRGD 0,8V???
PCH_DSWVRMEN 3.23v
PM_SLP_SUS_L 3.34v
PPVCC_S0_CPU = 1,7V
SYS_PWROK_R=3,4V
PLT_RESET_L=0V
PLT_RST_BUF_L=0
PLT_RESET_L & PLT_RST_BUF_L & PM_MEM_PWRGD seems not good no?
thanks
this board is clean no liquid spill, the customer say, the mac make beep memory after an install system.
Now I have just fan spin, no chime and no display. i make this measure:
PPBUS_G3H 12.8v
SMC_ADAPTER_EN 3.38v
PM_BATLOW_L 3.3v
ALL_SYS_PWRGD 3.38v
PM_DSW_PWRGD 3,4v
PM_MEM_PWRGD 0,8V???
PCH_DSWVRMEN 3.23v
PM_SLP_SUS_L 3.34v
PPVCC_S0_CPU = 1,7V
SYS_PWROK_R=3,4V
PLT_RESET_L=0V
PLT_RST_BUF_L=0
PLT_RESET_L & PLT_RST_BUF_L & PM_MEM_PWRGD seems not good no?
thanks