820-00165-A - liquid yaourt damage - charge - Turn on, Chemie restart, no screen.

samstown

Member
Hi,

I got this A1466, got drops of milk, was sill working for month and now stopped. I can see trace of yaourt neard LCD connector, on diode, bigcoil and the two caps.
When connected to power, magsafe get green, then orange, fan start to spin for 3 seconds, I hear Chemie... and reboot, same again and again.

I can't measure any voltage on those caps and coil.


Thanks
Sam
 

Attachments

  • A1466_near_LCD.png
    A1466_near_LCD.png
    185 KB · Views: 0

2informaticos

Administrator
Staff member
Post diode mode to ground on both pins of D7701; w/ and w/o LCD connected.
Be sure F7700 is good.
Don't forget to check XW7720 and inspect U7701 for corrosion.
 

samstown

Member
Thanks.
F7700 is good.
without LCD
D7701 Diode mode to ground.
Pin1 =.389
Pin2 =.604

with LCD (almost same)
Pin1 =.388
Pin2 =.604

XW7720 is a bridge or that's just a piece of copper, I don't get what component is it (pics attached.. there no component)

pics of U7701, it looks ok to me.
 

Attachments

  • WhatsApp Image 2022-08-25 at 20.49.50.jpeg
    WhatsApp Image 2022-08-25 at 20.49.50.jpeg
    149.7 KB · Views: 0
  • WhatsApp Image 2022-08-25 at 20.56.49.jpeg
    WhatsApp Image 2022-08-25 at 20.56.49.jpeg
    89.3 KB · Views: 0
Top