No-Clean
Member
Board had some water damage.
After UC replaced most resistors around U1950 and also U1950 same thing.
PPBUS_G3H -> 8,56V
PPVRTC_G3H -> 3,3V
ALL_SYS_PWRGD -> 0V
PP5V_S5 -> 5V
PP3V3_S5 -> 3,3V
PP3V3_SUS -> 3,3V
When I Trigger SMC_ONOFF_L and check for drop pulse at PM_PWRBTN_L (at same time) I do get a pulse down to 0.3V but PM_SLP_S4_L is 0V and there is no pulse here when I repeat the SMC_ONOFF_L trigger.
After UC replaced most resistors around U1950 and also U1950 same thing.
PPBUS_G3H -> 8,56V
PPVRTC_G3H -> 3,3V
ALL_SYS_PWRGD -> 0V
PP5V_S5 -> 5V
PP3V3_S5 -> 3,3V
PP3V3_SUS -> 3,3V
When I Trigger SMC_ONOFF_L and check for drop pulse at PM_PWRBTN_L (at same time) I do get a pulse down to 0.3V but PM_SLP_S4_L is 0V and there is no pulse here when I repeat the SMC_ONOFF_L trigger.