Alan.L
Member
board was liquid damaged and corrosion was found on u7090, Q7180, Q7130, Q7155. I've replaced all these corroded parts.
J9500's pin 19,21 was corroded. I've already replaced this connector.
after fully charged the battery, when the light goes green then after approx 30min the green light goes out.
when i re-plug the magsafe the green light sometime goes out instantly.
i've already tried another known good magsafe board+cable, trackpad+flex cable, battery.
using a original magsafe 2 85w charger.
ISL:
resistance between:
27/28: 20 ohms
16/17: 3.2 ohms
PPBUS_G3H: 8.57v
PP3v42: 3.4v
bad isl and smc??
J9500's pin 19,21 was corroded. I've already replaced this connector.
after fully charged the battery, when the light goes green then after approx 30min the green light goes out.
when i re-plug the magsafe the green light sometime goes out instantly.
i've already tried another known good magsafe board+cable, trackpad+flex cable, battery.
using a original magsafe 2 85w charger.
ISL:
resistance between:
27/28: 20 ohms
16/17: 3.2 ohms
PPBUS_G3H: 8.57v
PP3v42: 3.4v
bad isl and smc??
Last edited: