Jeffotskie26
Member
no sign of corrosion
tried replace IO board/ribbon still same
i didnt see any short circuit
PPBUS 8.19V
i notice that pin 13 on u7000 is no voltage also SMC_RESET_L 0V but not shorted.
i tried osci on U5110 Mhz is flactuating (looping)
SMC chip issue? need replace?
tried replace IO board/ribbon still same
i didnt see any short circuit
PPBUS 8.19V
i notice that pin 13 on u7000 is no voltage also SMC_RESET_L 0V but not shorted.
i tried osci on U5110 Mhz is flactuating (looping)
SMC chip issue? need replace?
