Hello,
Got a 820-00165 that had a not powering up issue, after some measuring around and after a burnt isl replacement the machine would then not charge the battery. After replacing the smc now it powers up, chimes, i get an asd without errors but it wont boot on any media.
I connect the hdd it shows me the envelope with the question mark, i connect a yosemite install usb, it starts loading half way through it gets stuck but if you leave it going for like 5 minutes you can hear the infamous "to use english for the main language" thingie but the bar is still half way through and no install ui shows up.
Any ideas?
Got a 820-00165 that had a not powering up issue, after some measuring around and after a burnt isl replacement the machine would then not charge the battery. After replacing the smc now it powers up, chimes, i get an asd without errors but it wont boot on any media.
I connect the hdd it shows me the envelope with the question mark, i connect a yosemite install usb, it starts loading half way through it gets stuck but if you leave it going for like 5 minutes you can hear the infamous "to use english for the main language" thingie but the bar is still half way through and no install ui shows up.
Any ideas?