hi, I just got this device with liquid damage.
was running, fan full speed and no akku to see, I cleaned it and replaced the smc
after that fan was good and akku to see, communication working but still 8,22V PPBUS_G3H
now still replaced U7100 and PPBUS_G3H has now 8.55V, so i2c communication should working now.
the device take mor than 1.5A now i cant measure because tha battery is full already from all the trying
no idea , the akku is good but if no dcin cable pluged in it turns off. need some help please
was running, fan full speed and no akku to see, I cleaned it and replaced the smc
after that fan was good and akku to see, communication working but still 8,22V PPBUS_G3H
now still replaced U7100 and PPBUS_G3H has now 8.55V, so i2c communication should working now.
the device take mor than 1.5A now i cant measure because tha battery is full already from all the trying
no idea , the akku is good but if no dcin cable pluged in it turns off. need some help please
Last edited: