Hi everyone,
I have an 820-00165, the board looks new and has a green light but no power.
noticed that F7140 has 8.6v on pin 1 but 0v on Pin 2, I can also see that there is short to ground on pin 2.
I just bought myself a power supply and connected black wire to the screw hole and red to pin 2 (f7140 removed), on the power supply itself I can only increase the amps, set the amps to 5 and voltage went to 0.85v. What am i doing wrong here?
I have an 820-00165, the board looks new and has a green light but no power.
noticed that F7140 has 8.6v on pin 1 but 0v on Pin 2, I can also see that there is short to ground on pin 2.
I just bought myself a power supply and connected black wire to the screw hole and red to pin 2 (f7140 removed), on the power supply itself I can only increase the amps, set the amps to 5 and voltage went to 0.85v. What am i doing wrong here?