(347) 552-2258 [email protected]

820-00165 Shutdown when Sleep Mode engaged

H

Hardwood T/S

Member
This guy had no backlight, replaced U7701 and cleaned up corrosion on the PPHV_S0SW_LCDBKLT circuitry. Board boots fine and works perfectly now, except for when it tries to go into Sleep Mode. Once it fully enters Sleep Mode, the computer fully turns off. Fans have stopped spinning, keyboard backlight has gone out, pressing keys does not bring the screen back up, etc. and when pressing the power button once the machine chimes and boots as if it had been properly shut off.

Now I know these can often be goose chases or down the rabbit hole, but would there be any classic lines to check for on a 00165 board? The rest of the board looks spotless in terms of corrosion but I will take another look later tonight/tomorrow.
 
2informaticos

2informaticos

Administrator
Staff member
Try first original Magsafe 2 (two) charger.
Magsafe 1--> 2 adapter used on these machines can generate weird issues.
If still the same, try known good LIO board/flex.
 
H

Hardwood T/S

Member
Tried new I/O cable and I/O board, no difference (tho the machine now chimes much faster when turned on). Trackpad/TP cable look just fine, no signs of water damage but should I try with known good parts anyway? Any other potential problem points besides these as well?
 
H

Hardwood T/S

Member
In the case of an operating system issue I've done a few updates, but no dice. Been using an OEM Magsafe 2 since the start as well. Any other ideas?

edit - could it be the SSD? It seems to only happen when the hard drive itself is put to sleep. I'll test with a different SSD.
 
Last edited:
You must log in or register to reply here.
Top