ytesfay80
Member
I have this board that doesn't look to have any liquid damage and is stuck at 5v and 0.21amps on all 4 ports. There isn't any boot loop just a steady 5v. I was getting 1.4v on PP3v3_G3H and so far I have replaced U6903, R6910-13, C6910/11/13/15/16 and D6902 .
I still get the same voltage but I noticed when I remove R6915 from the board I get 3.39v on PP3v3_G3H but I still get 5v on the charger but 0amps this time. When I put R6915 back on it goes to the original issue.
I visually inspected all the CD3215 chips and there doesn't look to be any damage to any of them or around them.
I still get the same voltage but I noticed when I remove R6915 from the board I get 3.39v on PP3v3_G3H but I still get 5v on the charger but 0amps this time. When I put R6915 back on it goes to the original issue.
I visually inspected all the CD3215 chips and there doesn't look to be any damage to any of them or around them.