KootenayMacGuy
Member
I have a 2016 A1707 820-00281 Machine here that slowly starting acting up (shutting off randomly, no power) I have had it back in my shop four times and it just randomly starts working again after removal and reinstallation of the logic board. Currently this is what the board does (removed from the case):
Connect to power, 20V and 1.4-1.7A, attempts to boot. Shuts off about 4 seconds later, stays at 20v 0A.
Boots again, 20V and 1.4-1.7A. Stays on for approximately 10 seconds then shuts off and remains at 20v 0A
When board is installed and battery connected, normal operation but shuts off/reboots randomly while in use and sleeping.
I have replaced ISL 9239 in hopes it was just a charge controller issue. No change.
Connect to power, 20V and 1.4-1.7A, attempts to boot. Shuts off about 4 seconds later, stays at 20v 0A.
Boots again, 20V and 1.4-1.7A. Stays on for approximately 10 seconds then shuts off and remains at 20v 0A
When board is installed and battery connected, normal operation but shuts off/reboots randomly while in use and sleeping.
I have replaced ISL 9239 in hopes it was just a charge controller issue. No change.