No-Clean
Member
Board came in with corrosion around CD3215 U3100, U3000 was corroded and missing a pad, some other pads on board needed to be rebuild and some resistors R3105, R3108 and R3109 also got replaced as well as both CD3215 and U3000, I still only get 5v and 300ma with board alone, whats weird is that the battery has a charge still and board powers on, when I plug in the charger on the affected port with the board on the casing I get 5v when I first plug in, but if I unplug it and plug it back on then I get nothing on the meter, all other ports while the board is on the casing give me 20v wit 0a.
ppb3v3_g3h is 3.3v
PP3V3_UPC_XA_LDO is 3.3v
I was barely getting a hang of the older boards, this USB-C boards are kicking my ass.
ppb3v3_g3h is 3.3v
PP3V3_UPC_XA_LDO is 3.3v
I was barely getting a hang of the older boards, this USB-C boards are kicking my ass.