george-a
Member
Hi guys,
nice to be here again, need to update myself to latest development and there is no other place for that.
I have a 820-00850 that switches to 20V only when the battery is connected. It will then draw 0.8-0.9A (possibly fully charged batt) and will give PPVCC_S0_CPU 1V. The fans spin and I get mouse light but no image internally, externally (if I disconnect the lvds) and no touchbar image.
F9000 is at 12.59V.
Board is clean from liquids. Customer said one day was working next day not.
Any pointers?
nice to be here again, need to update myself to latest development and there is no other place for that.
I have a 820-00850 that switches to 20V only when the battery is connected. It will then draw 0.8-0.9A (possibly fully charged batt) and will give PPVCC_S0_CPU 1V. The fans spin and I get mouse light but no image internally, externally (if I disconnect the lvds) and no touchbar image.
F9000 is at 12.59V.
Board is clean from liquids. Customer said one day was working next day not.
Any pointers?