prodigy83
Member
My reference only: TT10189
Problem: liquid damage, does not turn on even though USBC meter shows 20v.
Work done so far: C9589 had a short and was replaced. CHGR_BGATE has 12v but is unstable, it drops to 4v then back up to 12v. I have already replaced U7000, I also removed all the capacitors on this CHGR_BGATE rail, along with Q7065. I was able to try a Revive a few times prior to the above repairs, which failed with an error 6. I recently tried to force it in to dfu, and try again, I am getting the PP1V8_SLPS2R and used a wire to force it, but it was not going in to dfu.
Problem: liquid damage, does not turn on even though USBC meter shows 20v.
Work done so far: C9589 had a short and was replaced. CHGR_BGATE has 12v but is unstable, it drops to 4v then back up to 12v. I have already replaced U7000, I also removed all the capacitors on this CHGR_BGATE rail, along with Q7065. I was able to try a Revive a few times prior to the above repairs, which failed with an error 6. I recently tried to force it in to dfu, and try again, I am getting the PP1V8_SLPS2R and used a wire to force it, but it was not going in to dfu.
