-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-01521-02 5v 0.04a
- Thread starter yair37
- Start date
Check if all AWAKE and SLPS2R voltages are present.
Do you get 3.3V at L6960 and L7690?
Do you get 3.3V at L6960 and L7690?
Did you exactly follow all the steps from DFU tutorial?
Check voltage and diode mode to ground at all LDO rails of both CD3215 chips.
Check voltage and diode mode to ground at all LDO rails of both CD3215 chips.
So, you get correct 1V1 LDO on both ports?
Any history available?
Did you check for liquid sign on the audio board?
Remove it and check its both sides and audio flex.
Any history available?
Did you check for liquid sign on the audio board?
Remove it and check its both sides and audio flex.
"Did you exactly follow all the steps from DFU tutorial?"
?
?
Looks like T2 internal problem.
You can try forcing SOC_FORCE_DFU to 1V8_AWAKE.
You can try forcing SOC_FORCE_DFU to 1V8_AWAKE.
Yes, run a tiny wire.
Bad T2, or something wrong with USB communication.
I suspect T2, if no corrosion on USB-C area.
I suspect T2, if no corrosion on USB-C area.
How do you get PPBUS_G3H then???