820-01700 Stuck on 20v 0.45A

[iremont]

Another little water damage around u9080, board goes to dfu and if i revive, it gives error. stays 20v and 0.45a

 

[iremont]

PPBUS_G3H_SSD1_SNS i think it shows short because 10ohm to ground

 

[2informaticos]

At least the trace to R5630 is also broken.
But the big problem is the SSD, which is probably damaged by overvoltage.

 

[iremont]

u think r5630 is broken line ?

 

[iremont]

or just replace u9080 ?

 

[2informaticos]

U9080, or mabe near filter caps, got burnt.
However, if you don't gte PPBUS_G3H, will not help mchanging burnt component only.
Find the culprit, then rebuild the trace; maybe bad R5630.