820-01949-A Water damage

[Rez Razmi]

I have a water damage 820-01949-A logicboard. it had damage on the U3100_x area. I replaced R3070, R3058, R3057, R3072, R3033, and C3101_x
when I connect a charger I get 20V and it goes up to 0.79A then the Apple logo comes on but it'll be stuck on the logo and goes down to 0.40A, 0.30A, and A jumps up and down. Also, I noticed the D3100_x is damaged as well but I can't find D3100_X(NSR20F40NX_G) online to replace it. Would it be alright if I take it off and test the board or any advice on where I should look for?

 

[2informaticos]

Board works without D3100.
However, no more protection agains charger spikes.

Machine remains with Apple logo, or turns off/restart?
As always for T2 machines, try DFU...

 

[Rez Razmi]

It stays on the Apple logo then fans kicks in at high speed.

 

[Rez Razmi]

can't put it on DFU mode. when I connect a USB C. it won't take more than 5V & 0A. Any advice?

when the charger is connected


when the charger and a USB C are connected

 

[2informaticos]

Did you follow all the steps from DFU tutrial linked on the forum?
You can try to force DFU; using RE032 pads.