Did you flash back the dump which got image?
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-01958 dead after an attempt to update, no boot, no dfu mode - SOLVED
- Thread starter hjpl
- Start date
Yes, but with the serial number changed.
I noticed some light discoloration on C8151 (PP1SR3V3_G3H_P0V6_S3_VIN) but no shorts.
Now I've flashed the original saved dump and completed the DFU restore but I have no caps-lock activity and no images, only the touchpad click.
I noticed some light discoloration on C8151 (PP1SR3V3_G3H_P0V6_S3_VIN) but no shorts.
Now I've flashed the original saved dump and completed the DFU restore but I have no caps-lock activity and no images, only the touchpad click.
Last edited:
Try again with original, which gave image first.
I replaced the U4770 because it was no longer recognized by the programmer, reflashed the working dump with the modified serial and completed the DFU restore but still no boot/image/activity.
So I disconnected the battery and connected only the logic board to power and noticed a drawing of 0.49a.
I reassembled, connected battery and power then it finally booted up.
Thanks for your Help!
So I disconnected the battery and connected only the logic board to power and noticed a drawing of 0.49a.
I reassembled, connected battery and power then it finally booted up.
Thanks for your Help!
I glad to hear is solved...