-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-02020 // 5V 0.1 - 0.3A //
- Thread starter quasimodo
- Start date
0.032 reading is really bad.
Probably nothing get hot injecting voltage.
But a good thermal camera may help you.
Don't inject more than 6V there; as always, start with just 1V.
Probably nothing get hot injecting voltage.
But a good thermal camera may help you.
Don't inject more than 6V there; as always, start with just 1V.
quasimodo
Member
got it. UP700 was the bad guy.
but now i got the apple logo - starting to boot, then shuts off. clicking sound somewhere on the board. whats that?
when macbook tries to boot, the green led for the cam was always on and flickering. removed LP610, no light, but same behaviour.
what the hell is goig on here?
but now i got the apple logo - starting to boot, then shuts off. clicking sound somewhere on the board. whats that?
when macbook tries to boot, the green led for the cam was always on and flickering. removed LP610, no light, but same behaviour.
what the hell is goig on here?
Does it stay on in Recovery menu?
Disconnect internal LCD and test again.
And no external video?
USBC meter shows no consumption?
USBC meter shows no consumption?
What is actual diode mode reading at 3V8_AON?
This looks good.
May have something else damaged on 5V_S2 power rail.
May have something else damaged on 5V_S2 power rail.