Anterweb
Member
Came in with liquid damage,
Coffee was spilt into the mac before christmas! It was pretty grim when I opened it up and it had 3 or 4 real bad spots of corrosion!,
Its had a good clean and after passing through the Ultrasonic the board looks like new again,
I get just 5v / 0 amps on USB-meter and I am reading a dead short to ground on anything related PPBUS_AON
( doing a visual inspection I cant see anything obviously wrong but do seem to have 2 missing components RC332 / CC332 - but unsure if this is one of those where the board dose not match the schematic but I do not have another same board to compare? )
Where to start finding this short? I'm a bit lost on these newer boards?
Thanks in advance
Coffee was spilt into the mac before christmas! It was pretty grim when I opened it up and it had 3 or 4 real bad spots of corrosion!,
Its had a good clean and after passing through the Ultrasonic the board looks like new again,
I get just 5v / 0 amps on USB-meter and I am reading a dead short to ground on anything related PPBUS_AON
( doing a visual inspection I cant see anything obviously wrong but do seem to have 2 missing components RC332 / CC332 - but unsure if this is one of those where the board dose not match the schematic but I do not have another same board to compare? )
Where to start finding this short? I'm a bit lost on these newer boards?
Thanks in advance