820-02098 MagSafe cycling on/off

2informaticos

Administrator
Staff member
First of all, welcome to the forum!

You can replace only U5500, but must get it from donor board, same model and position.
Just in case, reflash U5560 first; if you can get good working dump.
 

repMacFixit

New member
Thank you and that worked.

For future repairs, what flash tool would you recommend for reflashing of U5560. I was lucky this time around, i had a donor board that i could swap with. I currently have a TL866A minipro.
 

2informaticos

Administrator
Staff member
Any programmer works, even the cheapest CH341.
You just need to get a proper adapter board to solder such chip.
 
Top