Hi, hope you are having a good day. So this board is heavy liquid damage. Ppbus_aon was shorted due to ur760 and ug800 and ug400 was blown. And up800 ( i just removed it as waiting for more of them)
I took off ur760
Replaced ug400( donor board a2442 but not sure if its good) ug800.
So no boosting it goes to 5.32v and then 0.07 a and then will go to 0.21 amp and drop down again. Will repeat this cycle.
The other issue is the right type c port will only show voltage on way. If i flip it its just blank amp meter. I will add pictures.
I took off ur760
Replaced ug400( donor board a2442 but not sure if its good) ug800.
So no boosting it goes to 5.32v and then 0.07 a and then will go to 0.21 amp and drop down again. Will repeat this cycle.
The other issue is the right type c port will only show voltage on way. If i flip it its just blank amp meter. I will add pictures.
