820-02443 - No power 5V 0.010A

joesklar

Member
Hi there,

I have a faulty board. The meter is reading anywhere between 5.020 - 5.040V and 0.000 - 0.030A. The amp reading seems to suggest it is power cycling somewhat...

I tested U5700 and I'm getting the correct voltages. In fact I am getting PPBUS_AON.
Around U5200 PPDCIN_AON_CHGR_R I am getting only 5V. Does this suggest an issue with the CD32 chips?

I tested all USB-C connectors with the same readings.

Any help is appreciated!
 

joesklar

Member
I originally replaced the screen. Since replaced, sold on eBay. The customer returned it after 1 month, when I got it back it is in this state. There were no known issues with the board.

3V8_AON - 3.8V

I'm not sure what to probe around U8100. What is an LDO? If you can tell me what to test I can provide the readings.

Many thanks
 

2informaticos

Administrator
Staff member
Low Drop Output (LDO) rails are clearly marked on pages 42 (Master PMU) & 38 (Slave PMU).

BTW, don't bother with the ones marked "NC" (Not Connected)!
 

joesklar

Member
Thanks for the explanation!

Here are the voltages I think I have them all covered.

U7700:
PP1V8_S2 - 0.3-0.4V fluctuating
PP1V2_S2 - 0.3-0.4V fluctuating
PP3V8_AON_SPMU_ISNS - 3.8V
PP1V5_AON_VCORE_SPMU - 1.5V
PP1V2_AON_SPMU - 1.2V
PP1V8_AON_SPMU - 1.8V
PP1V2_AWAKESW_BLC - 0.0V
PP0V72_S2_VDDLOW - 0.140 - 0.170V fluctuating

U8100:
PP3V8_AON_MPMU_ISNS - 3.8V
PP0V8_S2_CLVR_VDDDIG - 0.200 - 0.240 fluctuating
PP3V3_AON - 1.7 - 1.9V fluctuating
PP1V8_S2SW_CLVR_VDDC1_LDO - 0.380 - 0.460V fluctuating
PP3V3_S2 - 0.9 - 1.1V fluctuating
PP1V2_S2 - 0.360 - 0.460V fluctuating
 
Top