No liquid damage.
At first attempt I found 0.03 in diode mode on CG406 (PP5V_S2SW_USBC23).
I replaced UG800 and it was fine with correct diode more value it works fine.
Next morning and again 20V 0A and PP5V_S2SW_USBC23 have low diode mode value.
This time I replaced UG800 with UG400 (same location on donor) and again was fine but after 2 days failed.
3rd attempt I just replaced UG800 and was fine for two days.
Every time when it was fine I charger on all USB C ports (both sides) without any issues.
Now I see as soon UG800 is removed diode mode value is correct.
Any ideas?
At first attempt I found 0.03 in diode mode on CG406 (PP5V_S2SW_USBC23).
I replaced UG800 and it was fine with correct diode more value it works fine.
Next morning and again 20V 0A and PP5V_S2SW_USBC23 have low diode mode value.
This time I replaced UG800 with UG400 (same location on donor) and again was fine but after 2 days failed.
3rd attempt I just replaced UG800 and was fine for two days.
Every time when it was fine I charger on all USB C ports (both sides) without any issues.
Now I see as soon UG800 is removed diode mode value is correct.
Any ideas?