Chuck60
Member
At u7201
Ppbus_g3h=12.56v
Pp5v_s5 =5v
Pp3v3_s5 =3.3v
pp3v3s5_entrip1=800mv
Pp5vs3_entrip2=800mv
5vp3v3_reg_en=3.3v
Pp5vs3_vbst_r=5v
Pp5vs3_LL=0v
I’m seeing that both entrip signals are low so both s5 and s3 should be up. If I’m reading the schematic correctly. I have no short on s3 line. someone has already Been in this area and flux is all over it :/
Ppbus_g3h=12.56v
Pp5v_s5 =5v
Pp3v3_s5 =3.3v
pp3v3s5_entrip1=800mv
Pp5vs3_entrip2=800mv
5vp3v3_reg_en=3.3v
Pp5vs3_vbst_r=5v
Pp5vs3_LL=0v
I’m seeing that both entrip signals are low so both s5 and s3 should be up. If I’m reading the schematic correctly. I have no short on s3 line. someone has already Been in this area and flux is all over it :/
Last edited: