For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Strange... Now when I turn it on, regardless of the keyboard or mouse being plugged in it takes a long time to start up, loads for a bit, then goes to a window showing me how to turn on a bluetooth keyboard and mouse... Does it when they're both plugged in, neither plugged in, or just one of them.
pp3v3_s4 is present and at 3.34v on the keyboard and trackpad connector. pp18v5_s4 however, is not giving enough power. I'm getting VERY little from it, less than 1 volt. I'm still in the process of tracing it back to see where it's getting dragged down, but as I am new to this and quite stupid, trying to understand the schematic isn't the easiest thing. How important is pp18v5_s4?
Pin 2 of U5805 has the full 5V coming in to it perfectly fine, so that means U5805 itself is bad... Right..? Or is there something else outside that should be boosting it that i'm not understanding?