For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Hello
PP_3v42_G3H ok
PPBUS_G3H ok
I have examined the power supply circuit of the 5v and the 3v3
starting from C9487 up to U7101 and pin 25.
in both I find the voltage unstable, can the defect be Q7260?
L7220 and 0 I measured U7201 and accidentally short circuited two pins now ppbus_g3h and 2.34v Maybe I created problems with U7000, pp3v3 no longer pulsates, I'm still a beginner
I found a hole on Q7260 and replace it on L8220 I don't have low insulation. I removed F7040 to see the short on ppbus_g3h, but now I get 3.24v is it not that I have to replace u7000? One last question, I found Q7260 on a SIZ710DT donor card only that instead of 17W, there is 15W I have to check the data sheet or well the same?
So, I replaced Q7260 and pp3v3 returned PPBUS_g3H also returned to normal value, on L7220 I found C7252 with low insulation. But is U1800 normal for it to be very hot? Or did I create problems with it? Now I only have 5V S3 to restore